GATE Syllabus 2027: All 30 Papers & PDF Download

The GATE Syllabus 2027 helps you identify the topics to study for your chosen Graduate Aptitude Test in Engineering paper. Whether you are preparing for Engineering, Science, Architecture, Technology or Humanities, understanding the latest paper-wise syllabus is the first step towards a focused preparation plan.

GATE 2027 is organized by IIT Madras and features 30 test papers. The syllabi have been revised for the 2027 examination. Explore the subject-wise syllabus links below, review the common General Aptitude section, and use the preparation guidance to plan your revision.

GATE 2027 syllabus overview infographic showing 30 test papers, 15 marks for General Aptitude, and the new Robotics and Automation paper
GATE 2027: 30 test papers, common General Aptitude section and a new Robotics and Automation paper.

GATE 2027 Syllabus for All 30 Test Papers

Select your GATE paper from the table to view its dedicated syllabus page, detailed topics and available preparation materials on Your Mentor Guru. The paper codes shown below are those used for GATE 2027.

Common for all papers: GATE General Aptitude (GA) Syllabus.

Important Changes in the GATE 2027 Syllabus

The GATE 2027 syllabus includes revisions that make it especially important to use the correct examination-year version when preparing. Some changes affect the list of papers, while others affect the structure of optional sections.

  • 30 test papers: The examination offers 30 papers covering engineering, technology, science and humanities disciplines.
  • Robotics and Automation (RA): This is a new GATE 2027 test paper.
  • Textile Engineering and Fibre Science: Formerly a separate paper, it is now available as the XE9 optional section within Engineering Sciences.
  • Revised syllabi: Candidates should compare the 2027 topics with any older notes or PDF copies they have saved.
  • Revised section codes: The XE, XH and XL papers use updated section identifiers.

GATE 2027 Paper Pattern and Marks

Every GATE 2027 test paper carries 100 marks. General Aptitude (GA) is common to all papers and contributes 15 marks; the remaining 85 marks come from the paper-specific syllabus and, where applicable, its compulsory or optional sections.

FeatureDetails
Exam modeComputer-based test
Duration3 hours
Total marks100
General Aptitude15 marks
Paper-specific component85 marks
Question formatsMCQ, MSQ and NAT
LanguageEnglish
Number of papers per candidateOne or up to two, subject to permitted combinations

How Negative Marking Works

  • MCQ: Incorrect answers receive a deduction of one-third of the marks for a one-mark question or two-thirds for a two-mark question.
  • MSQ: No negative marking; partial marks are not awarded.
  • NAT: No negative marking; the answer is entered numerically.

Special Section Structure: XE, XH and XL

Some GATE papers include compulsory components and a choice of optional sections. Make your choice according to the rules for your paper, rather than assuming every GATE paper follows the same structure.

Engineering Sciences (XE)

The XE paper includes Engineering Mathematics (XE0), worth 15 marks, plus any two optional sections worth 35 marks each. Optional sections include Fluid Mechanics (XE1), Materials Science (XE2), Solid Mechanics (XE3), Thermodynamics (XE4), Polymer Science and Engineering (XE5), Food Technology (XE6), Atmospheric and Oceanic Sciences (XE7), Energy Science (XE8), and Textile Engineering and Fibre Science (XE9). General Aptitude contributes another 15 marks.

Humanities and Social Sciences (XH)

The XH paper includes Reasoning and Comprehension (XH0), worth 25 marks, and one optional section worth 60 marks. The optional disciplines are Economics (XH1), English (XH2), Linguistics (XH3), Philosophy (XH4), Psychology (XH5), and Sociology (XH6). The common General Aptitude section contributes 15 marks.

Life Sciences (XL)

The XL paper includes compulsory Chemistry (XL0), worth 25 marks, and any two optional sections worth 30 marks each. The optional sections are Biochemistry (XL1), Botany (XL2), Microbiology (XL3), Zoology (XL4), and Food Technology (XL5). General Aptitude contributes the remaining 15 marks.

How to Download the GATE 2027 Syllabus PDF

  1. Find your subject and paper code in the syllabus table above.
  2. Click the subject name to open the corresponding syllabus page on Your Mentor Guru.
  3. Read the section-wise topics and identify the areas that require the most preparation.
  4. Use the PDF download option on the subject page to save the syllabus for offline study.
  5. Compare your study notes against the revised 2027 syllabus before starting a new topic.

How to Prepare Using the GATE Syllabus

Start with a Topic Checklist

Turn the syllabus into a checklist with three columns: topics not started, topics being studied and topics completed. This helps you measure progress without repeatedly reading the entire syllabus. Break broad sections into smaller topics so that revision targets are achievable and specific.

Prioritize Understanding and Problem Solving

GATE questions often test application rather than direct recall. Study the underlying concepts, solve representative numerical or analytical questions, and revisit difficult topics until you can explain the method without looking at a solution. For technical papers, maintain a concise formula and concept notebook.

Prepare General Aptitude Throughout

General Aptitude carries 15 marks in every paper, making it an important part of preparation. Practice verbal, quantitative, analytical and spatial aptitude regularly. Short, consistent sessions are often easier to sustain than leaving all aptitude preparation for the final weeks.

Use Previous Papers and Timed Practice

After covering a syllabus section, solve relevant previous-year questions and examine why each answer is correct. Timed practice builds speed and helps you choose which questions to attempt first. Review incorrect answers to identify whether the issue was a concept gap, calculation error or time pressure.

Revise in Repeated Cycles

Set aside time each week to revisit previously completed sections. A revision cycle can include reviewing a short summary, attempting a small set of questions and updating a list of common mistakes. In the final phase, spend more time on weak areas and full-length mock tests rather than learning too many new topics.

Suggested 12-Week Syllabus Study Plan

WeeksFocusOutcome
1–2Review syllabus, identify prerequisites, begin high-priority topics and GATopic checklist and initial notes
3–5Study core subjects and solve topic-wise questionsStrong foundation in major sections
6–8Complete remaining syllabus and revise difficult conceptsFirst full syllabus coverage
9–10Previous-year questions and sectional testsBetter accuracy and question selection
11–12Full-length mock tests, error analysis and final revisionImproved time management and readiness

The ideal schedule depends on your starting level and chosen paper. Candidates with less preparation time can shorten the initial study phases, while those beginning early can spend longer strengthening fundamentals.

Choosing the Right GATE Paper

Select a paper based on your academic background, familiarity with the syllabus and the admission or career requirements of your target institution. If you are considering two papers, compare both syllabi and the permitted combinations before making a decision. The availability of a paper does not automatically mean that every postgraduate programme or employer will accept its score.

Students preparing for interdisciplinary areas should pay particular attention to the differences between Biotechnology (BT), Life Sciences (XL), Engineering Sciences (XE), Data Science and Artificial Intelligence (DA), and Robotics and Automation (RA). These papers can overlap in some topics but have distinct syllabus structures and expected competencies.

Official examination reference: GATE 2027 test papers and syllabus — IIT Madras. Use the subject links above for Your Mentor Guru study materials.

Frequently Asked Questions

How many papers are there in GATE 2027?

GATE 2027 has 30 test papers, including Robotics and Automation (RA).

Is General Aptitude compulsory?

Yes. General Aptitude is common to every test paper and carries 15 of the 100 marks.

Where can I find the syllabus for my paper?

Select your subject in the paper-wise table above to open its dedicated syllabus page on Your Mentor Guru.

Can I appear in two GATE papers?

You may choose one or up to two papers, provided the selected combination is permitted for GATE 2027.

What is new in GATE 2027?

The syllabi have been revised, Robotics and Automation has been introduced as a test paper, and Textile Engineering and Fibre Science has become an optional section of Engineering Sciences (XE9).

Is Textile Engineering a separate GATE 2027 paper?

No. Textile Engineering and Fibre Science appears as the XE9 optional section under Engineering Sciences.

Are GATE question papers in English?

Yes. GATE 2027 test papers are in English.

How many marks is each GATE paper worth?

Every paper is worth 100 marks: 15 for General Aptitude and 85 for the remaining syllabus components.

What are MCQ, MSQ and NAT questions?

MCQs have one correct option, MSQs may have multiple correct options, and NAT questions require a numerical answer.

Does GATE have negative marking?

Wrong MCQ answers attract negative marks; MSQ and NAT questions do not have negative marking.

How should I start GATE syllabus preparation?

Read your paper syllabus, divide topics by weight and difficulty, practice past papers, and reserve time for General Aptitude and revision.

Do all papers use the same optional sections?

No. Engineering Sciences (XE), Humanities and Social Sciences (XH), and Life Sciences (XL) have distinct compulsory and optional sections.

Related Study Resources

Scroll to Top